CONTACT US

Equal thickness tinplate is a cold-rolled tinplate with the same amount of tin plating on both sides. Tin plated sheet is made by rolling low carbon steel, followed by acid washing, cold rolling, electrolytic cleaning annealing, leveling, edge cutting processing, and then cleaning, electroplating, softening, passivation treatment, and oil coating before cutting into finished tin plated sheet metal.

Differential thickness tinplate is a cold-rolled electroplated tin plate with different tin plating amounts on both sides. Tin plated sheet is made by rolling low carbon steel, followed by acid washing, cold rolling, electrolytic cleaning annealing, leveling, edge cutting processing, and then cleaning, electroplating, softening, passivation treatment, and oil coating before cutting into finished tin plated sheet metal.

Tin Mill Black Plate (TMBP) steel is manufactured from hot rolled coils by pickling to remove the surface oxide produced during the hot rolling stage, and cold reducing through a cold mill to the desired thickness. TMBP produces a low ductility product that is usually processed further to develop desired end use characteristics.

It is the chemical properties of SPCC that differ from MR type. The Sulphur content is marginally higher as a percentage in SPCC. Using SPCC for general line and MR Type for Food.

ASTM A36 steel coil is one of the most common grades of steel used in structural applications. This mild carbon steel grade contains chemical alloys that give it properties such as machinability, ductility, and strength that are ideal for use in constructing a variety of structures.

ASTM A285 standard is for carbon steel, low and intermediate tensile strength steel coils intended for fusion-welded pressure vessels. The steel coil under ASTM A285 ranges in three grades, A, B and C, most common use is ASTM A285 Grade C coils.

ASTM A387 steel coil is chromium-molybdenum steel for pressure vessels for elevated temperature service. ASTM A387 steel coil include ASTM A387 Grade 5, Grade 9, Grade 11, Grade 12, Grade 22. Each A387 grade is divided into 2 class: class 1 and class 2.

ASTM A514 steel (also known as T1) grades incloud A, B, E, F, H, P, Q & S. This steel coil has a high yield strength and good weldability. ASTM A514 steel coil is quenched and tempered carbon-alloy steel. It is typically used when abrasion resistance and high-impact properties are required.

ASTM A515 carbon-silicon steel coils primarily for intermediate- and higher-temperature service in welded boilers and other pressure vessels. Coils are available in three grades having different strength levels: Grades 60, 65, 70, 415, 450, and 485.

ASTM A516 covers carbon steel coils intended primarily for service in welded pressure vessels where improved notch toughness is important. According to different strength levels, the coils are available in four grades: Grades 55, 60, 65, and 70. The most common is Grade 70 or called out A516-70.

ASTM A537 standard refers to pressure vessel coils, material in heat-treated, carbon-manganese silicon steel. Based on different strength and heat treatment, it ranges to Class 1, 2 and 3. ASTM A537 Class 1 coils are supplied in the normalised condition whilst Class 2 coils are quenched and tempered.

ASTM A572 steel coil is a popular grade of high-strength low-alloy (HSLA) steel that is typically used in structural applications. A572 steel contains chemical alloys that enhance the material’s hardness and ability to bear weight. There are five different grades of A572 steel coil: Grade 42, Grade 50, Grade 55, Grade 60 and Grade 65.